Autonomous lighting by Novéa A sustainable solution

+33(0)2 41 36 53 98
Contact

Bike and pedestrian paths YOU HAVE A PROJECT ?

Pedestrian paths, greenways and cycle paths, which are often far from the main axes, require long and costly civil engineering works for their security.

The installation of our solar street lights will facilitate the implementation and preserve the environment of the site. Moreover, the punctual need for lighting on these installations makes them applications perfectly adapted for autonomous street lighting.

The lighting of a bicycle path or pedestrian walkway must provide a strong sense of security during night-time use, and allow easy identification of other users or obstacles.

Average illuminance level: > 5 average lux (excluding PMR zone)

RECOMMENDED OPERATING MODE:

  • Most energy-efficient: 10% stand-by power up and presence detection all night long. NOVMOOV
  • Intermediate: ignition at full power the first three hours of the night and then switch to standby mode at 10% and presence detection the rest of the night. NOVMOOV option.
  • The most energy-intensive: ignition on full power the first three or four hours of the night and one or two hours in the morning and standby mode the rest of the night. Presence detection possible between the two periods of permanent lighting.

NOVMOOV system: a wireless communicating solution that allows one or more groups of lampposts to be lit in full power simultaneously.

LIGHTING POWER:

The table below shows the required lighting power according to the objective of the level of illumination to be attained and according to the surface indicated.

It will remain to specify the operating time per night to validate the power of the solar panel and the capacity of the battery.

Products related to this type of project

Combi Top 2

  • Solar panel power: 100 Wp (360° adjustable)
  • Light height: 4 à 6 m
  • Power consumption: 10 à 20 W
  • Luminous flux leaving: 1 500 à 3 200 lumens
View the product

Combi Top 3

  • Solar panel power: 160 Wp (360° adjustable)
  • Light height: 4 to 8m
  • Power consumption: 10 to 40 W
  • Luminous flux leaving: 1 500 to 4 800 lumens
View the product

AKKOR TEKK 1.4

  • Solar panel power: 100 Wc
  • Light height : 4 m
  • Power consumption: < 25 W (16 LED) / ⩾ 25 W (32 LED)
  • Luminous flux leaving: 1 500 à 5 250 lumens
View the product

AKKOR TEKK 2.6

  • Solar panel power: 200 Wc
  • Light height: 6 m
  • Power consumption: < 25 W (16 LED) / ⩾ 25 W (32 LED)
  • Luminous flux leaving: 1 500 à 5 250 lumens
View the product

Subscribe to the newsletter

vulputate, felis nunc Donec efficitur. suscipit velit, mi, Aliquam ipsum dolor. id